|
Below is a list of spares available from Hiden Isochema. For a quotation, please email us at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
with the part codes and the quantity required, including your contact details and postal address.
Sample Holders Part Code | Description | Quantity (per set)
| | SB001 | Standard Stainless Steel Mesh Sample Holder (42μm aperture mesh, approx. diameter 15mm)
| 1 or 5 (can mix and match with Pyrex Sample Holders) | | SB002 | Standard Stainless Steel Mesh Sample Holder (20μm aperture mesh, approx. diameter 15mm) | 1 or 5 (can mix and match with Pyrex Sample Holders) | | SB003 | Standard Stainless Steel Mesh Flat Base Sample Holder (42μm aperture mesh, approx. height 15mm, approx. diameter 15mm) | 1
| | SB004 | Large Stainless Steel Mesh Cylindrical Sample Holder (42μm aperture mesh, approx. height 23mm, approx. diameter 15mm) | 1
| | SB005 | Stainless Steel Foil Cylindrical Sample Holder (approx. height 11mm, approx. diameter 11mm) | 1
| | SB006 | Large capacity Stainless Steel Mesh Cylindrical Sample Holder (42μm aperture mesh, approx. height 23mm, approx. diameter 20mm) | 1
| | SB007 | Quartz Sample Holder with Basal Hole (approx. height 11-12.5mm, approx. diameter 11-12.5mm, weight ≤ 0.3g) | 1
| | SB008 | Quartz Sample Holder without Basal Hole (approx. height 11-12.5mm, approx. diameter 11-12.5mm, weight ≤ 0.3g) | 1
| | SB009 | Large Quartz Sample Holder (approx. height 20-25mm, approx. diameter 20mm, weight ≤ 1g) | 1
| | SB010 | Pyrex Sample Holder (approx. bulb diameter 12mm, approx. hole diameter 5mm, weight 250-300mg) | 1 or 5 (can mix and match with Standard SS Mesh Sample Holders)
| | SB011 | Pyrex Sample Holder (approx. bulb diameter 12mm, approx. hole diameter 5mm, weight 150-200mg) | 1 or 5 (can mix and match with Standard SS Mesh Sample Holders) |
(A picture catalogue of IGA and IGAsorp sample containers is available upon request)
Cables
Part Code
| Description
| Quantity (per set)
| CAB001
| Hiden Isochema RS232 Communication Cable 5m | 1 | | CAB002 | Hiden Isochema RS232 Communication Cable 3m | 1
| | CAB003 | IGA Direct Motor Cable | 1 | CAB004
| RS232 Communication Cable (for Grant waterbaths) | 1
| CAB005
| RS232 Communication Cable (for Huber waterbaths)
| 1
|
Gaskets | Part Code | Description
| Quantity (per set)
| GSKT001
| DN-35-CF Copper Gasket (for IGA reactor flange) | 5 or 100
| GSKT002
| DN-100-CF Copper Gasket (for IGA balance flange)
| 3
| GSKT003
| VCR-8 Stainless Steel Gasket (e.g. for HTP reactor) | 10, 25 or 100
| GSKT004
| VCR-4 Stainless Steel Gasket
| 10, 25 or 100
| GSKT005
| VCR-4 Stainless Steel 2μm Filter Gasket
| 2
|
IGA Accessories Part Code
| Description | Quantity (per set) | | GRAV001 | Standard Stainless Steel reactor | 1 | | GRAV002 | Quartz Reactor tube (with KF40 fitting) | 1 | | GRAV003 | DN-35-CF to KF40 adaptor (with ¼" port) | 1 | | GRAV004 | Type K Thermocouple (as External or Sample sensor) | 1 | | GRAV005 | PRT (Platinum Resistance Thermometer) Sensor (as External sensor) | 1 | | GRAV006 | PRT (Platinum Resistance Thermometer) Sensor (as Sample sensor) - gold plated | 1 | | GRAV007 | Stainless Steel Swagelok™ 4BK Series Valve | 1
| GRAV008
| Stem Seal Kit for 4BK Series Valve
| 1
| GRAV009
| Gasket Kit for 4BK Series Valve
| 1
| GRAV010
| Switched Mode PSU (Power Supply Unit) +5 and ± 15 V
| 1
| GRAV011
| Switched Mode PSU (Power Supply Unit) +24 V
| 1
| GRAV012
| Hangdown Set (includes: 1 sample chain, 1 tare chain, 4 balance hooks, 4 sample hooks)
| 1 | GRAV013
| IGA Tungsten Hangdown (diameter 0.125mm, length 300mm) | 1 | GRAV014
| Quartz Hook (diameter 0.7mm, length 120mm)
| 1
|
IGAsorp Accessories Part Code
| Description
| Quantity (per set)
| SORP001
| IGAsorp Loading Shield
| 1 | | SORP002 | IGAsorp Organic Vapour Upgrade Kit | 1
| SORP003
| IGAsorp Sample Housing Gasket
| 1
| SORP004
| IGAsorp Spares Kit
| 1
| SORP005
| IGAsorp PRT (Platinum Resistance Thermometer)
| 1
| SORP006
| 10% Rotronic™ Salt
| 1
| SORP007
| 50% Rotronic™ Salt | 1
| SORP008
| 80% Rotronic™ Salt | 1
| SORP009
| Hangdown Set (includes: 1 sample chain, 1 tare chain, 4 balance hooks, 4 sample hooks) | 1
| SORP010
| High Temperature Internal Hose
| 1
| SORP011
| High Temperature Waterbath Hose
| 1
|
HTP Accessories Part Code
| Description | Quantity (per set)
| HTP001
| Ni Foil Burst Disc
| 1
| HTP002
| Proportional Relief Valve (PSV1)
| 1
| HTP003
| Replacement PSV1 Spring | 1
| HTP004
| Pneumatically-actuated Diaphragm Valve (Normally Open)
| 1
| HTP005
| Pneumatically-actuated Diaphragm Valve (Normally Closed) | 1
| HTP006
| Solenoid Valve
| 1
| HTP007
| HTP Reactor Thermocouple Gland | 1
| HTP008
| VCR-8 Male Nut (for reactor) | 1
| HTP009
| Type K Thermocouple (1/16" diameter)
| 1 |
Bolt Sets Part Code
| Description
| Quantity (per set)
| BOLT001
| Standard Reactor Bolt Set (includes M6 × 35 bolts, washers and nuts)
| 6
| BOLT002
| Quartz Reactor Bolt Set (includes M6 × 25 bolts and nuts)
| 6
| BOLT003
| Dry Loader Sealing Screws | 6
|
If you have any further questions regarding accessories or consumables please email us at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
|
